How to install a shower faucet new construction

How do you install a shower in new construction?

drywall joint compound Step 1: Prepare the Shower Area ” Step 2: Pre- Fit the Shower ” Step 3: Mark and Drill Holes for the Valves ” Step 4: Marking and Removing Panels ” Step 5: Install the Base ” Step 6: Insert the Back and Side Panels ” Step 7: Attach the Back and Side Panels ” Step 8: Install the Plumbing Panels ”

Does the plaster guard get removed when installing a shower faucet?

The plaster guards should be removed once tile and drywall/substrate prep is done and prior to installing the trim. The plastic pieces do not stay in place. I am not a professional, but here are quotes from the Moen installation instructions for the shower that I just built.

What do you put under shower base?

Most installers recommend putting a bed of mortar down for the shower base to sit on. Check the manufacturer’s installation instructions and see what they recommend in case the use of mortar is discouraged.

What goes behind shower walls?

Rigid air barrier materials for use behind showers and tubs include fiber -cement, fiber -reinforced gypsum, glass mat gypsum, or fiber mat-reinforced cementitous backer panels.

How far should shower valve sticks out from wall?

12 inches

Why is my shower handle so hard to turn?

Shower handles can become hard to turn for several reasons, but the primary one is buildup. Mineral deposits from water, especially calcium, can build up over time, blocking the screw mechanism inside that’s meant to turn easily.

You might be interested:  Entry level construction management salary

How level does a shower base need to be?

Any shower base is only as level as the floor it rests upon. While shower bases are made of durable materials, an uneven floor underneath will allow the base to flex and give under the weight of those who use it regularly. Soon the shower base will begin to pop and creak, and it will give slightly when you stand on it.

Do you put flooring under shower?

A floating floor needs to float, do not put it under the shower pan. You will need to leave an expansion gap at the pan per manufacturer recommendations on whatever floor you choose. Therefore, you need not be perfect with the install , but will cover the edge with molding.

How do I stop my shower base from squeaking?

Subfloor flexing. A few well-placed screws can eliminate the squeak . Gluing plywood to the sides of squeaky floor joists can lessen subfloor flex, too.