How to install led recessed lighting new construction

Can I use new construction recessed lighting?

New – construction fixtures are supported by screwing or nailing the fixture’s frame to the ceiling joists. But if you have access to space above the ceiling where the fixture will be located, you can install new – construction recessed lights in your existing ceiling.

How far apart should LED recessed lights be placed?

A good general rule for placement if to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for an 8-foot high ceiling would be 4 feet between each light. This will give good spacing for general room lighting .

How much does it cost to install LED recessed lighting?

Installing the lights: $200 to $250 by an electrician. Wiring the lights into the ceiling – $70 to $140 per light. Moving around any obstacles (heating ducts, joists, other wires): $200 or more per light.

Should I use 4 inch or 6 inch recessed lights?

4 inch lighting takes up considerably less space than 6 inch options or regular lighting . This makes it ideal for small rooms and surfaces where even an inch of space makes a big difference. Increased home value: Well installed and aesthetically placed recessed lights can raise the value of your home.

Do LED recessed lights get hot?

Answer: While LEDs run much cooler than incandescents, their electronic components and external heat sinks do get quite hot ; you would still need to keep the insulation away from your fixtures. You could hire an electrician to replace each fixture with a sealed one rated for insulation contact (IC).

You might be interested:  Installing stair treads new construction

What wire do I use for recessed lighting?

State or city electrical codes may require a specific type and/or gauge of wire to safely install recessed lighting fixtures. The electrician will know these requirements. Typically, a 12- gauge cable with two insulated conductor wires and a ground wire are used.

How many can lights for a 12×12 room?

A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space . Doing so provides even, overall illumination. Considering this, how many can lights for a 12×12 room ? The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans.

How far apart should 4 inch recessed lights be?

4 feet

Can you have too many recessed lights?

In fact, using too many recessed light may leave areas of your room dark and may even cost you more on your electric bill. Create a lighting plan. An expert can help you plan for the right number of lights based on the size of the space and the technical aspects of the light fixtures in question.

Does recessed lighting add value to a house?

A bright way to increase the value of your home is to add lighting . Hire an electrician to add recessed lights to a dim kitchen or family room or elegant sconces to a formal dining or living room. You’ll enjoy the lighting now, and your home will feel more welcoming to home buyers later.

Are recessed lights worth it?

Recessed lighting definitely has some great advantages that make it a great choice for your next lighting installation. The simple fact that the lights are built straight into the ceiling make them an effective application for any room or space with low clearance.

You might be interested:  How much do construction contractors make

Do you need an electrician to install recessed lighting?

Professional Recessed Lighting Installation If the thought of installing new electrical wiring in your home is beyond your capabilities—or it’s actually not allowed under your city code—then you ‘re going to need to hire a professional electrician to get the job done for you .