Curtain wall construction details

How is a curtain wall attached?

Generally speaking, curtain wall attaches to the outside of the floor slabs, acting as a “ curtain ” that is literally hung on the building and therefore, non-load bearing. It spans slab to slab, and systems are most often constructed in one of two ways; stick-built or panelized.

What is the purpose of a curtain wall?

The primary purpose of a curtain wall system is to protect the building interior against the exterior natural phenomena such as sun exposure, temperature changes, earthquake, rain, and wind. This protection can be separated into two major categories, namely structural safety and interior environmental control.

How many types of curtain walls are there?

There are two main types of curtain walling construction: “stick” and “unitised”. In stick construction, the curtain wall frame is constructed mainly on site with mullions and transoms supporting glass, spandrel panels, metal panels and brise-soleils, connected piece by piece.

What is difference between storefront and curtain wall?

Storefront is typically center glazed and is not self-draining. Curtain wall : In the most basic sense of the term, the curtain wall is any non-load-bearing exterior wall that hangs (like a curtain ) from the floor slabs. Curtain wall can be 25 feet or higher, depending on the design of the building.

What is a unitized curtain wall?

Unitized curtain wall systems are comprised of large units that are assembled and glazed in the factory. They are then shipped to the job site and erected on the building façade. The vertical and horizontal modules mate and stack together to create a complete system.

You might be interested:  Wrigley field construction plans

What is stick system curtain wall?

The Stick System is a curtain walling system consisting normally of extruded aluminium transoms (anchored to a slab or sub structure) and mullions known as “ sticks ” which are cut to length in the factory prior to assembly on site which may compromise of mechanically held fixed or open glazing (single pane or double

What does it mean when someone says curtains?

This is the end. Typically refers to an adverse ending to something, or (hyperbolically or humorously) to death. It’s curtains for the defending champs if they don’t pull off a miraculous comeback. It’s curtains for me if I don’t get home by curfew.

What are window walls called?

curtain walling

How thick is a curtain wall?

In residential construction, thicknesses commonly used are 1/8 inch ( 3 mm ) monolithic and 5/8 inch ( 16 mm ) insulating glass. Larger thicknesses are typically employed for buildings or areas with higher thermal, relative humidity, or sound transmission requirements, such as laboratory areas or recording studios.

What is a mullion window?

A mullion is a vertical element that forms a division between units of a window or screen, or is used decoratively. Its secondary purpose is to provide structural support to an arch or lintel above the window opening.

What is a facade in architecture?

The word facade originally comes from the Italian word “facciata”, and is defined as the outside or all of the external faces of a building. The term is frequently used to refer just to the main or front face of a house.

How much does a storefront window cost?

On average, plate glass runs between $5.00 and $6.00 per square foot. Tempered glass typically runs about $25.00 per square foot. Both glass types can be purchased for custom need.

You might be interested:  Construction change order process

What is a storefront window?

A storefront or shopfront is the facade or entryway of a retail store located on the ground floor or street level of a commercial building, typically including one or more display windows . A storefront functions to attract visual attention to a business and its merchandise.

Are curtain walls load bearing?

A curtain wall is a non- load – bearing exterior wall cladding that is hung to the exterior of the building, usually spanning from floor to floor. Curtain wall vertical framing members run past the face of floor slabs, and provision for anchorage is typically made at vertical framing members only.