Board and batten construction

What is board batten construction?

Board and batten , or board-and-batten siding, describes a type of exterior siding or interior paneling that has alternating wide boards and narrow wooden strips, called ” battens .” The boards are usually (but not always) 1 foot wide. The boards may be placed horizontally or vertically.

What kind of wood is used for board and batten?

Most common types of lumber used in board and batten siding are: Cedar . Pine . Redwood .

Is board and batten expensive?

Installing new board and batten siding costs between $4,000 and $14,000, but most homeowners pay about $9,000. Material boards cost between $0.75 and $10 per square foot. Including labor, the total cost to install board and batten siding averages $2.25 to $12.50 per square foot.

Does board and batten make a room look bigger?

Use things like board and batten to make a small entryway or bathroom look larger. We had a very small entryway with a dropped ceiling in our last house , but when we installed extra tall board and batten , it made the space feel WAY bigger , and more open!

Is board and batten still in style?

Stay: Board and Batten Exterior The modern farmhouse style for interiors is still going strong, says experts at Houzz, the online home remodeling and design source. And more builders are turning to tried-and-true, board-and-batten exteriors to add texture and interest to an otherwise flat facade.

What size boards are used for board and batten?

Rough sawn, unseasoned boards or boards surfaced on one side and two edges (S1S2E) are commonly used for board-and-batten siding. Sizes are from 1 x 2 in. to 1 x 12 in. Boards up to 6 in. wide should be fixed with one nail per bearing driven through the center of the board.

You might be interested:  Average price per square foot for new construction

Is board and batten more expensive than siding?

While there aren’t many, if any physical drawbacks to using board and batten siding , it can be more expensive than average siding jobs. This is because the installation must be done very carefully, and takes longer to complete than typical siding .

Do you have to caulk board and batten?

When installing a board and batten treatment on walls – you are bound to find plenty of joint gaps after you add one coat of paint. Caulk is your best friend. It seals all the gaps.

How long does board and batten last?

25 years

Is board and batten the same as Hardie board?

Today, to achieve the Farmhouse design, Hardie Vertical Panel ( boards ) are used as the main siding material, and HardieTrim ( batten boards ) are used as a decorative accent, giving designers room for distinct creativity.

What’s the cheapest siding for a house?

Siding Materials: Because vinyl siding has so many different styles and models, you can spend less on vinyl siding than on any other material with engineered wood becoming more affordable. Metal siding is the next cheapest (including aluminum siding prices), then wood siding, and finally stucco.

How thick should board and batten be?

Bottom boards : 4-1/2” Top Boards : 3-1/2” Battens : 2-1/2”

How do you calculate board and batten spacing?

Add 1 to your number of spaces to get the number of battens on the wall. Now multiply your batten width by the number of battens . Subtract that number from your total wall length. Divide that number by the number of spaces you calculated earlier, and THAT number will be your exact spacing between each batten .

You might be interested:  Land and construction loan calculator

Can Plywood be used for board and batten?

Board-and-batten can be installed onto solid plywood or OSB sheathing.