Electrocution was the second leading cause of worker deaths on construction sites in 2011

What was the second leading cause of worker deaths on construction sites in the United States in 2011?

Electrocution

Which of the following are a part of PPE that can prevent electrocution?

Depending on the job task to be performed, PPE for the electric power industry generally includes safety glasses, face shields, hard hats, safety shoes, insulating (rubber) gloves with leather protectors, insulating sleeves, and flame-resistant (FR) clothing.

What are the most common types of hazards or injuries caused by electricity in order?

These BE SAFE terms are defined as: B = Burns: A burn is the most common shock -related injury. Burns from electricity are one of three types: Electrical, Arc/Flash or Thermal Contact. E = Electrocution: Electrocution is fatal; it means to kill with electricity.

Which of the following are electrical hazards OSHA quizlet?

OSHA’s electrical standards address electrical workplace hazards. Employees working on, near, or around electricity may be exposed to dangers such as, electric shock , electrocution , burns, fires, and explosions.

What is the most disabling accidents on the job?

1. Overexertion involving outside sources. This category includes injuries related to lifting, pushing, pulling, holding, carrying or throwing objects. It costs businesses $13.79 billion in direct costs and accounted for 23% of the overall national workers’ comp burden.

How many people died in construction every year?

The latest BLS annual report on fatal workplace accidents, released on Dec. 17, showed that there were 1,008 construction deaths last year in the private sector, compared with 971 in 2017. The industry’s fatal accident rate held even, at 9.5 per 100,000 full-time-equivalent workers.

You might be interested:  Sworn construction statement mn

How can you protect from electrocution?

How can I help prevent electric shock ? Inspect electric cords for fraying. Do not plug too many things into the same outlet. Replace all older two-pronged outlets. Insert plastic safety caps in all unused electrical outlets if small children are in the home.

What is common PPE used for electrical safety?

PPEs Required to Enter a Substation Hard hats (with full/partial brims as necessary) Safety glasses with side shields. Face masks/shields. Suitable footwear ( safety /steel-toed boots, rated dielectric footwear)

What PPE should electricians wear?

The biggest risk posed to an electrician is that they might come into contact with electricity. In these cases, electrical PPE clothing would be a great line of defence. Items such as electrical safety gloves, eye protection, and bump caps are all necessary to ensure that electricians are protected at work.

What is the number one cause of electrocution?

Lack of proper insulation material on an electrical wire is one of the main causes of electrocution. Naked wires pose a great danger to workers. A study that was conducted by an independent institution revealed that about 17% of all electrocution cases are a result of poor insulation.

Which of the following is the most common type of electrical hazard?

transmission line

What is the most common type of electrical hazard?

Common types of electrical hazard include: Contact with live wires resulting in electric shock and burns, Fires due to faulty wiring, Exposed electrical parts, Ignition of fires or explosions due to electrical contact with potentially flammable or explosive materials, Inadequate wiring,

You might be interested:  Osha approved first aid kit for construction

Which of the following is an electrical hazard?

The main hazards with electricity are: contact with live parts causing shock and burns . faults which could cause fires ; fire or explosion where electricity could be the source of ignition in a potentially flammable or explosive atmosphere, e.g. in a spray paint booth.

Which of the following is a type of burn caused by electrical hazards?

Arc or flash burns result from high temperatures caused by an electric arc or explosion near the body. These burns should be treated promptly. Thermal contact burns are caused when the skin touches hot surfaces of overheated electric conductors, conduits, or other energized equipment.

What are the three most common types of GFCI’s?

There are three types of GFCI which are commonly used . They are called the GFCI output, the portable GFCI and the GFCI circuit breaker.