Cinder block retaining wall construction

Can I use cinder block for retaining wall?

A cinder block retaining wall is only as straight and solid as the base it’s built on. For a 4-ft. tall wall , excavate a trench deep enough to accommodate 4 to 6 in.

How much does it cost to build a cinder block retaining wall?

Cost: About $10 to $12 for cinder block; for brick and stone, around $20 to $25 per square face foot (double that figure for a two-sided wall).

What blocks to use for retaining wall?

Masonry. With sufficient drainage, stone , brick, or concrete -block walls are strong and long lasting. You can buy these materials at stone yards and home centers, but you’ll likely need a mason to install them.

Should you fill cinder blocks with concrete?

Whenever you are working with cinder block , you can strengthen them significantly by filling them with concrete . This is something that is not difficult to do and will strengthen your cinder blocks quite a bit. You may also find that if you have cinder blocks that are cracked, concrete can help.

What is the cheapest retaining wall block?

What is the cheapest retaining wall material? Treated pine and is the least expensive material. Hardwood is more expensive than treated pine. Railway sleepers are another – slightly more expensive – option and are built to withstand ground and water contact. Concrete sleepers are more expensive.

What is the easiest retaining wall to build?

For the average do-it-yourselfer, building a retaining wall is easiest when using masonry blocks that will be stacked no taller than three feet, with no mortar binding the stones or concrete members. (For a curved wall , mark instead with a garden hose or spray paint.)

You might be interested:  Construction quality control certification

Can you build a block wall without mortar?

Surface bonding, according to the University of Georgia College of Agriculture (which began developing the concept in 1967), is ”both a material and a technique” for erecting concrete- block walls without the use of mortar . In other words, no mortar is used to hold the blocks together.

How much should I charge per block?

Concrete block walls typically cost $10 to $15 per square foot to install. Consider getting several professional estimates for your wall or foundation project to get an accurate price. Use our concrete block calculator to estimate the number of blocks and material needed for your project.

WHY DO Retaining walls fail?

The reasons for these types of failures are lack of proper reinforcement, improper drainage behind the wall (lack of weep holes or clogged holes), foundation footing problems, settlement or expansion of the soil, overloading of the wall , construction errors, and/or other design errors.

What is the strongest type of retaining wall?


How long will a block retaining wall last?

For a permanent wall structure, the general lifespan is generally between 50 and 100 years. This does , however, depend on the conditions of the soil and groundwater at your site.

How long will a concrete block house last?

Poured concrete block footings and slab foundations should last a lifetime, 80 to 100 years or more provided they were quality built. The foundation termite proofing, 12 years, provided the chemical barriers remain intact. Properly installed waterproofing with bituminous coating should last 10 years.

Do you need rebar in a block wall?

Wall Size. A freestanding garden wall or block privacy fence will require less reinforcing than a basement or other load-bearing wall in a house or other building. An 8-foot-high wall will obviously require more rebar than a 4-foot wall . Very short walls , under 4 feet and laid with mortar, may not require any rebar .

You might be interested:  Safety rules for construction

Are poured concrete walls better than block?

Poured concrete wall foundations are arguably stronger than cinder blocks . Poured walls have a better lateral strength, which means they are able to resist more pressure from the water and the soil from the outside. A poured wall doesn’t have joints like a block wall so it is easier to waterproof.